WYZE WSPRK1 SPRINKLER CONTROLLER USER MANUAL
Introduction
on purchasing a Wyze Sprinkler Controller. This Quick Reference Guide describes how to install, operate, and maintain your controller. Please read the instructions below.
ABOUT
- Smart Control: The Wyze WSPRK1 allows you to remotely control and monitor your sprinkler system from anywhere using a smartphone app. This gives you the flexibility to adjust watering schedules and settings even when you’re not at home.
- Scheduling: You can create customized watering schedules based on your lawn or garden’s specific needs. Set specific days, times, and duration for each zone or group of sprinklers.
- Weather Integration: Some smart sprinkler controllers, including the Wyze WSPRK1, offer weather integration. By accessing local weather data, the controller can adjust watering schedules automatically based on rainfall, temperature, and other environmental factors. This helps to optimize water usage and prevent overwatering.
- Multiple Zones: If you have a multi-zone irrigation system, the sprinkler controller can independently control each zone, allowing you to set different watering schedules and durations for different areas of your lawn or garden.
- Watering History and Insights: The controller may provide information and insights about your watering history, such as how much water has been used and saved, allowing you to make informed decisions about your irrigation practices.
- Smart Home Integration: Depending on the capabilities of the Wyze WSPRK1, it might offer integration with popular smart home ecosystems like Amazon Alexa or Google Assistant. This would allow you to control your sprinkler system using voice commands or include it in automation routines with other smart devices in your home.
Package List
Controller Stations
Wyze Sprinkler is an 8-station controller. Each station is connected to a sprinkler valve. The specific valve turns on when it receives a signal from the controller, and then the sprinkler will start watering. When the watering task is finished, the controller will shut off the valve and turn on the next one in sequence.
Step-by-Step Instructions
Drilling on the wall
Drill two holes at the installation position, the size of the holes is φ 6mm × 40mm, and the distance between the two holes is 90mm. If the installation wall is made of wood, please see step 3.
Installing anchors Tap the anchors into the holes on the wall.
Mounting Screw the mount on the wall.
Wiring Connect power adapter, valve wires and sensors to corresponding terminals.
Installing controller
Place the back of the controller at the lower end of the mount and push the controller up into the mount.
App setup 
Download the Wyze APP and select “Add a product”, then the app will guide you to complete the setup process. After finishing the system setup, you can create the irrigation tasks.
Manual Controls
You can run the zone watering easily on the device. Press the left and right button to select a zone. Press the WATERING button (the upper one) to start a quick run immediately and press the STOP button (the lower one) to stop the watering.
Troubleshooting
One or more stations do not turn on:
- Faulty valve.
- Wire broken or not connected.
One station is stuck on and will not shut off:
- Faulty valve.
- Particles of dirt or debris stuck in the valve.
- Valve diaphragm faulty.
Controller is not online:
- Power adapter not plugged into an operational AC outlet.
- Wi-Fi connection unstable.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the followi ng two conditions: (1) this device may not cause harmful interference, and (2) this de vice must accept any interference received, including interference that may c ause undesired operation.
Changes or modifications not expressly approved by the party responsible for compl iance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Cla ss B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installatio n. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferen ce to radio communications. However, there is no guarantee that interference will no t occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Statement
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause in terference, and (2) This device must accept any interference, including interference t hat may cause undesired operation of the device.The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).