ICONPET® TURBO CORDLESS VACUUM
SERIES 3178
Go online for a comprehensive walkthrough of your product!
This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and
troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.com.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
- Donot expose to Store indoors.
- Donot use motorized nozzle on wet
- Donot allow to be used as a Close attention is necessary when used by or near children.
- Donot use for any purpose other than described in this user Use only manufacturer’s recommended attachments.
- Donot charge with damaged cord or If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at a service center.
- Donot pull or carry charger by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Keep charger cord away from heated
- Donot unplug charger by pulling on To unplug, grasp the charger plug, not the cord.
- Donot handle charger, charger terminals, charger plug, or appliance with wet
- Donot put any object into Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
- Keephair, loose clothing, fingers, and all parts of body away from openings and moving
- TurnOFF all controls before plugging or unplugging
- Useextra care when cleaning on
- Donot use appliance in an enclosed space filled with vapors given off by oil-
- Rechargeappliance only with the charger specified by the A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Useonly with charger provided by manufacturer SIL, Model SSC-320110US.
- Batterypack, charging port on the appliance and charger output are not to be short-circuited.
- Under abusive conditions, liquid may be ejected from the battery; avoid If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Donot use appliance that is damaged or Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Donot expose battery pack or appliance to fire or excessive Exposure to fire or temperature above 130°C/265°F may cause explosion.
- Follow all charging instructions and do not charge the appliance outside ofthe temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of
- Haveservicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is
- Donot modify or attempt to repair the appliance except as indicated in the instructions for use or
- Keepthe temperature range of between 4-30°C/40-104°F when charging battery, storing appliance or during
based paint, paint thinner, some moth-proofing substances, flammable dust, • Do not charge the machine outdoors.
or other explosive or toxic vapors.
- Turn OFFthis appliance before connecting the motorized
- Ifthe appliance has a handheld accessory like pet brush, motor driven head, the user shall avoid entrapment.
- Donot pick up anything that is burning or smoking, such as cigarettes, matches or hot
- Donot use without filters in place
- Riskof injury from moving Brush may start unexpectedly. Turn OFF before cleaning or servicing.
- Turn OFFall controls, including the power switch and disconnect charger from electrical outlet before making any adjustments, performing maintenance, troubleshooting, changing accessories or storing appliance. Such preventative safety measures reduce the risk of starting the appliance
- Thisappliance contains batteries that are non-replaceable.
- Donot incinerate the appliance even if it is severely The batteries can explode in a fire.
- Keepbatteries out of reach of
- Thebattery must be removed from the appliance before it is
- Keep appliance on a level surface.
- Donot use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, ) or use in areas where they may be present.
- Donot use to pick up toxic material (chorine bleach, ammonia, drain cleaner, ).
- Donot pick up hard or sharp objects such as glass, nails, screws, coins, etc.
- Plasticfilm can be To avoid danger of suffocation, keep away from children.
SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
COMMERCIAL USE OF THIS APPLIANCE VOIDS THE MANUFACTURER’S WARRANTY.
We’re so happy you chose ICONpet® Turbo Cordless Vacuum. We put this guide together to help you set up, use and maintain your cordless vacuum. We’ve also included some tips we think will come in handy when you first start using your cordless vacuum, so let’s get started!
For a comprehensive walkthrough of your product, go to
support.BISSELL.com.
What’s in the Box? 4
Installing the Wall Storage &
Charging Station 5
Using the Vacuum 7
Attaching Tools for Hand Vac Use 8
Cleaning & Replacing the Filters 10
Warranty 11
Getting to Know Your Vacuum
For additional support videos and information about your vacuum, visit support.BISSELL.com.
Product View
- HandVacuum Assembly
- CleaningMode Button
- PowerButton
- TankRelease Button
- DirtTank
- HandVacuum Release Button
- ExtensionWand
- FootRelease Button
- Parking Brake
- Tangle-FreeBrush Roll
- MotorizedFloor Cleaning Foot
- LEDHeadlights
- ChargingPort
- Post-MotorFilter
- Foot Hose
Assembly
Go to support.BISSELL.com for assembly videos.
- Connect the extension wandto motorized floor cleaning The wand will “click” into place.
- Connect the hand vacuumto the extension wand. The hand vac will “click” into
- Charge your stick vacuumbefore first Refer to page 6 for instructions.
Install the Wall Storage & Charging Station near a wall outlet and at least 4 feet from the ground.
- Lift the cover of the mountand position it using the included bubble
- Inserttwo screws to secure to the
- Insert the tool holders intothe side of the Wall Storage & Charging
- Pullthe power cord clip away from the
- Insertthe charging cord and secure it with the
- Plug the power adapter intothe wall. Place the machine on the mount. Refer to page 6 for charging
Charging the Battery
Go to support.BISSELL.com for additional how-to videos.
Before first use, make sure to fully charge your stick vacuum for 4 hours to get a full charge. You can plug the charger directly into the hand vacuum or into the Wall Storage & Charging Station.
Charging with the Hand Vacuum
4
- Plugthe battery charger into the
- Plug the charger into thecharging port on the back of the hand
- Letthe hand vacuum charge for 4 hours or until all three sections of the battery charge icon are
Charging with the Wall Storage & Charging Station
4
- Follow instructions onpage 5 for installing the Wall Storage & Charging Station. Once installed, hang the machine onto the
- Let the vacuum charge for 4hours or until all three sections of the battery charge icon are
ICONpet® Turbo can be used as a stick vacuum, hand vacuum or for extended reach with hand vacuum + wand.
|
|
|
| 1. Press the power button to begin cleaning and to turn OFF the machine when finished. | 2. Press the cleaning mode button to toggle between the three settings.
•• High For cleaning carpet and area rugs. This mode balances power and provides a run time of up to 18 minutes. This is the default mode when the vacuum is turned ON. ••• Turbo For maximum suction. This mode is active for 5 minutes and then will default back to high power mode. • Low For hard floors. Offers the quietest sound with longest run time of up to 50 minutes. Note: If your vacuum is difficult to push on carpet or is shutting off abruptly, try reducing the power setting. |
Note: All batteries differ when it comes to run time and power production. The cleaning mode you choose and the surfaces you vacuum (long, thick carpet uses more power than short, low pile carpet) affect run time and power produced. To better preserve run time and overall battery life,
use the power mode best suited to your cleaning task and only use TURBO mode when you need an additional boost of suction power.
Using the Parking Brake
Go to support.BISSELL.com for additional how-to videos.
The parking brake helps prevent the wheels from sliding when the machine is leaning against a wall.
Attaching Tools for Hand Vac Use
Go to support.BISSELL.com for tips on above floor cleaning tools.
Clean stairs or furniture easily with the tools provided. Pair your desired tool with the hand vacuum or extension wand.
- Press the release button todisconnect the hand vacuum from the extension
- Attach your chosen tool. Use the tool to clean
furniture, stairs or other surfaces in your home.
Emptying the Dirt Tank
More of a video person? Go to support.BISSELL.com for additional how-to videos.
- Turn OFF your machine.Remove the dirt tank by sliding the latch on the
- Grab the top of the tankand pull This will activate a
wiping feature to remove debris from the mesh filter screen.
- Remove the separator fromthe tank and tap on the side of the trash
Removing the Brush Roll
Go to support.BISSELL.com for a full list of maintenance and troubleshooting support.
- Turn the machine OFF andpress the foot release button to disconnect the foot from the extension
- With a flathead screwdriveror coin, twist the slot on the side of the foot clockwise and pull the brush roll
- Toreplace, push the brush roll back in the chamber and twist counter-clockwise with a tool or coin to lock in
Cleaning & Replacing the Filters
Go to support.BISSELL.com for tips on maintaining and replacing your vacuum filters.
Pre-Motor Filters
For best cleaning performance, always clean your pre-motor filter after each use.
- Turn OFF machine andremove dirt tank from the hand
Post-Motor Filter
- Pull filter from the top ofthe tank. Remove the filter from the filter frame Tap the filter against the side of a trash bin to remove dust and debris.
- Rinse under warm waterand squeeze to remove dirt. Lay out for 24 hours, until completely dry. Replace filter into the frame with the tag side down (touching the frame) before
- TurnOFF machine and press the latch on the back of the hand
- Remove thepost-motor filter from the
- Ifthere’s debris on the filter, tap it on a trash bin and rinse under warm Let dry
for at least 24 hours before putting it back in the vacuum and replacing the filter cover.
Troubleshooting
For additional help with your vacuum visit support.BISSELL.com.
This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more.
| Problem | Possible Cause | Remedies |
|
Vacuum won’t pick up dirt |
Filters are dirty. | Remove and rinse pre-motor filters. Let dry for 24 hours before reinstalling. Remove and dust off post-motor filter. |
| There is a clog in the vacuum. | Remove the foot and extension wand from the hand vacuum. Check for clogs in each of these sections. Clear clogs before reassembling. | |
| Dirt tank is not seated correctly. | Remove the tank and reseat properly. | |
|
Dirt is escaping from the vacuum |
Dirt tank is full. | Empty the tank. |
| Filters are missing or dirty. | Check to see if the pre- and post-motor filters are in place. Clean if necessary. | |
| There is a clog in the vacuum. | Remove the foot and extension wand from the hand vacuum. Check for clogs in each of these sections. Clear clogs before reassembling. | |
|
Vacuum won’t charge |
Wrong charger is being used. | Use only the charger that comes with the machine. |
| Charger is not plugged into the machine properly. | Remove the charger and reinstall into the hand vacuum. |
Errors
| Cause: Suction motor fault.
Remedy: Turn machine OFF. Check and clean filters. Check and clean the machine of clogs. If problem persists, contact Consumer Care. |
Cause: Brush roll stall.
Remedy: Turn machine OFF. Check and clean the Brush Roll of any clogs. Brush Roll can be removed for thorough cleaning (page 8). Turn machine ON. |
We’re Waggin’ Our Tails!
BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear. Visit BISSELLsavespets.com to learn more.
But wait, there’s more!
Join us online for a complete guide to your new product, including troubleshooting, product registration, parts, and more.
Go to support.BISSELL.com.
REGISTER
INFO
VIDEOS
PARTS SUPPORT
©2021 BISSELL Inc. All rights reserved. Part Number 1625490 05/21