Ninebot KickScooter MAX G30P User Manual

AssemblingYour KickScooter 06 5 Installing a Second Battery Pack (optional) 07 6 First Ride 08
Charging 09
Learning to Ride 09
Warnings 11
Folding andCarrying 15
Maintenance 15
Specifications 17

Certifications 2014 Trademark and Legal Statement 23 15 Contacts 23

Thanks for choosing the Ninebot KickScooter (hereinafter referred to as KickScooter)!

Your KickScooter is a fashionable transportation device with mobile app, allowing you to connect with other riders. Enjoy your ride and interact with riders worldwide!

This manual is applicable to the following models: E22 series: E22 / E22D / E22E

E25 series: E25A / E25D / E25E E45 series: E45 / E45D / E45E

WARNING!

Always use both electronic brake and foot brake for emergency stopping. Otherwise you risk falls and/or collisions from not achieving the max. braking capability.

* The picture is for reference only. Please refer to the actual product for more details.

1 Riding Safety

TheKickScooter is a recreational Before mastering riding skills, you need to practice. Neither Ninebot Inc. (means Ninebot (Beijing) Tech Co., Ltd. and its subsidiaries and aﬃliates) nor Segway Inc. is responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this document.

Pleaseunderstand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the Remember that whenever you ride the KickScooter you risk injury from loss of control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require longer braking distance. Sudden braking on low traction surfaces could lead to wheel slip, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.

Alwayswear a helmet when Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head.

Donot attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential

Respectpedestrians by always yielding the right of Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Please obey local traﬃc laws and regulations if situation is different.

Inplaces without laws, comply with the safety guidelines outlined in this Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions.

Do not allow anyone to ride your KickScooter on his/her own unless they have carefully read this manual and followed the NewRider Tutorial in the The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the KickScooter. Make sure each new rider wears a helmet and other protective gear.

Beforeeach ride check for loose fasteners and damaged If the KickScooter makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your KickScooter via the Segway-Ninebot App and call your dealer/distributor for service.

Be alert!Scan both far ahead and in front of your KickScooter — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).

Toreduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be 14+ years old. Always follow these safety instructions:

Peoplewho should not ride the KickScooter include:
1. Anyone under theinfluence of alcohol or
2. Anyone whosuffers from disease that puts them at risk if they engage in strenuous physical activity.

Anyonewho has problems with balance or with motor skills that would interfere with their ability to maintain

Anyonewhose weight is outside the stated limits (see Specifications).
Pregnant

Ridersunder the age of 18 years old should ride under adult
Complywith local laws and regulations when riding this Do not ride where prohibited by local laws.
Toride safely, you must be able to clearly see what is in front of you and you must be clearly visible to
Donot ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.

Donot attempt to charge your KickScooter if it, the charger, or the power outlet is

Aswith any electronic device, use a surge protector when charging to help protect your KickScooter from damage due to power surges and voltage Only use the Segway supplied charger. Do not use a charger from any other different product models.

Useonly Ninebot or Segway approved parts and Do not modify your KickScooter. Modifications to your KickScooter could interfere with the operation of the KickScooter, result in serious injury and/or damage, and void the Limited Warranty.

Childrenshould not play with the KickScooter or parts of it nor should cleaning or maintenance be done by The use of the machine results in the transmission of vibrations throughout the driver’s body.

Always placethe KickScooter on its stand on a flat and stable The KickScooter must be placed with the stand against the slope to prevent it from tipping over. Never place the KickScooter with the front facing down the slope, as the stand may close and tip the machine. Once the KickScooter is on its stand, check its stability to avoid any risk of falling (by slip, wind or slight jolt). Do not park the KickScooter in a busy area, but rather along a wall. If possible, always choose to park your KickScooter on flat ground.

Fora better driving experience, it is recommended to conduct a regular maintenance of the

Pleaseread the user manual before charging the

Donot touch the brake system, it could cause

TheA-weighted emission sound pressure level is less than 70 dB(A). The mechanical vibrations transmitted by the KickScooter are less than 5 m/s2.

02 03

2 Packing List

Handlebar Mainframe

3 Diagram

Headlight

Electronic throttle

Dashboard & Power button Electronic brake

Speedometer Error display

Overheat tip

User Materials

Folding latch

Bluetooth

Power mode

Power level

Second Battery Pack

Applicable scooter model	E22 series	E25 series	E45 series
Battery Model	NEB1002-H1	NEB1002-U1	NEB1002-H1
	Sold separately		Included

* ONLY use the battery in the applicable model. Otherwise there will be damage or dangers.

Accessories

Stem (battery cabin)

Second battery port

Reflector*

ForE22D, E22E,

E25 and E45 series.

Hub motor Reflector*

ForE22D, E22E, E25 and E45

Dashboard & Power button

Second Battery Pack*

For E45 series.Charge port

Power button (multi-functional)

Folding pedal

Rear fender/Foot brake Insurance plate area*

* For E22D, E25D and E45D.

Magnetic Brake*

ForE25 and E45 Kickstand

When unboxing your KickScooter, please verify that the above items are included in the package. If any components are missing, please contact your dealer/distributor or nearest service center (see Contacts in the user manual). After verifying that all components are present and in good condition, you can assemble your new KickScooter.

Please retain the box and packaging materials in case you need to ship your KickScooter in the future.

Remember to power off your KickScooter and unplug the charge cable before assembling, mounting accessories, or cleaning the mainframe.

Speedometer: Indicates the current speed. Also displays error codes when faults are detected.

Battery level: Indicates the remaining battery level with 5 bars. Each bar equates to approximately 20% power level. Power mode:

—Red “S” icon: Sport mode (maximum power/speed).

—White “S” icon: Standard mode (moderate power/speed).

—No “S” icon: Speed limit mode (minimum power/speed).

Bluetooth: A blinking Bluetooth icon indicates that the vehicle is ready to connect. A solid Bluetooth icon indicates that the vehicle is connected to a mobile device.

Power button: Short press to power on. Long press to power off. When powered on, press to turn on/off the headlight. Double-press to change power mode.

Overheat tip: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C). At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is restored to normal range.

Error display: The lit wrench icon indicates the scooter error.

4 Assembling Your KickScooter

Installinga Second Battery Pack (optional) Warning: please use the screws provided with

this product only.

Unfold the stem and push it until you hear aclick. Flip up the folding pedal. Then unfoldthe kickstand to support the scooter.

Note: Confirm that the latching axis on the folding mechanism is secured correctly.

Latching Axis

Install six screws (two on each side) with theincludedhex wrench.

1	3	2
4	6	5

Firmlyconnect the wires inside the handlebar and the stem. Slide the handlebar onto the stem. Be aware of the correct orientation.

Headlight facing front

Verifythat your KickScooter powers on and off.

Removethe three screws on the stem. Then remove the cover near the charge port and remove the M3 screw.

Installthe external battery on the rail and fix it with the M4 (20mm) screws (2 pcs) and M3 screw (1 pcs), provided with this product. After they are properly installed, block the screw holes with the rubber stopper.

Installthe rail with the M4 (10mm) screws (3 pcs), provided with this product. Please make sure it is properly fixed.

Verifythat your KickScooter powers on and off.

FirstRide There are safety risks when learning to ride the You must read the Riding Safety via the App before your first ride.

For your safety, your new KickScooter is not activated and will beep occasionally after POWER ON.

Until activated, the KickScooter maintains a very low riding speed, and can not perform with full function. Install the Segway-Ninebot App on your mobile device (with Bluetooth 4.1 and above), connect to the KickScooter with Bluetooth, and follow the App instructions to activate your KickScooter and enjoy the full performance.

Segway-Ninebot App Scan the QR code to download the App (iOS 9.0 and above, Android™ 4.3 and above).

7 Charging

Charging steps:

Open the charge port cover.

Insert the charge plug.

Close the charge port cover when finished.

Install the Segway-Ninebot App and register/login.

Power on the KickScooter. A blinking Bluetooth icon indicates the KickScooter is ready to connect.

WARNING

Do not connect the charger if the charge port or charge cable is wet. Do not charge or use your battery if it is damaged or see trace of water.

Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge). Close the charge port cover when not charging.

8 Learning to Ride

Click “Vehicle”→“Search vehicle” to connect to your KickScooter.

The KickScooter will beep when it has successfully connected. The Bluetooth icon will stop blinking and remain illuminated.

Follow the App instructions to activate the KickScooter and learn how to ride safely.

You can now start to use your KickScooter, check the status with the App, and interact with other users. Have fun!

Wear an approved helmet and other protective gear to minimize any possible injury.

Power on the scooter and check the battery Charge the scooter if the battery level is low.

9 Warnings

WARNING

Failure to follow these instructions could lead to serious injury.

Standon the foot deck with one foot and push off with another foot to start
Put your other foot on the foot deck to keep bothfeet Press the throttle to speed up when you are balanced.

Note: For your safety, the motor will not engage until the scooter reaches 2.5 mph (4 km/h).The speed is adjustable via the Segway-Ninebot App.

DO NOT ride the scooter in the rain.

Keep your speed between 3.1–6.2 mph (5–10 km/h) when you ride through speed bumps, elevator door stills, bumpy roads or other uneven surfaces. Slightly bend your knee to better adjust mentioned surfaces.

Slowdown by releasing the Squeeze the electronic brake and stamp the rear fender with foot at the same time for a brake.
Toturn, shift your body and turn the handlebar

WARNING

When braking rapidly, you risk serious injury due to loss of traction and falls. Maintain a moderate speed and look out

10 for potential hazards.

Watch your head when passing through doorways.

Watch your speed when traveling downhill. Use both brakes together when traveling at high speed.

DO NOT press the throttle when walking with the scooter.

DO NOT carry heavy objects on the handlebar.

Avoid contacting obstacles with the tire/wheel.

DO NOT ride the scooter with only one foot.

DO NOT ride on public roads, motorways, or highways.

Do not ride through puddles or any other (water) obstacles. In such a case please lower your speed and bypass the obstacle.

DO NOT rotate the handlebar violently while driving at high speed.

The KickScooter is for one rider only. Do not ride with another person. Do not carry a child.

12 13

Foldingand Carrying

DO NOT step on the folding pedal while riding.

DO NOT touch the hub motor after riding because it can get hot.

Step on the folding pedal while pushing the handlebar forward slightly.

Then fold the handlebar down until it locks into the rear fender.

When your KickScooter is folded up, simply lift it by the stem to carry.

11 Maintenance

DO NOT take your hands off the handlebar while riding. Do not ride with one hand only.

WARNING

DO NOT ride up and down stairs or jump over obstacles.

Cleaning and Storage

Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth.

NOTE

Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose.

WARNING

Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may damage the electronic components.

Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature

Always keep both hands on the handlebar or you risk serious injury due to loss of balance and falls.

extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

Maintenance and removal of the battery

Do not remove the battery. Removing the battery is complicated and can alter the operation of the machine: You can contact an authorized repairer if the product is still guaranteed. If the product is not guaranteed you can contact any specialized repairer of your choice. You can ask for the list of the authorized repairers to the customer service available at www.segway.com. For any further question, you can contact the customer service available at www.segway.com.

Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal. A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details are available in the App.

Replace the Tires

Tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the wheels is complicated and incorrect assembly can lead to instability and malfunctions:

Pleasecontact an authorized repairer if the product is still under manufacturer You can ask for the list of the authorized repairers to the customer service available at www.segway.com.
Ifthe product is no longer under guaranteed you can contact any specialized repairer of your
Shouldyou have questions, you can contact customer service available at segway.com. NOTE

Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. A low-power battery should retain charge for 30-60 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by

over-discharge or under-discharge will not be covered by the Limited Warranty. WARNING

Do not charge or use your battery if it is damaged or see trace of water. Do not attempt to disassemble the battery. Risk of fire. No user serviceable parts.

WARNING

Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Others

The external flexible cable of this transformer cannot be replaced; if the cord is damaged, the transformer must be discarded and replaced by a new one. Should you have questions, you can contact customer service available at www.segway.com.

In case of accident or breakdown: Please contact an authorized repairer if the product is still under guarantee. If not, you can contact any specialized repairer of your choice. You can ask for the list of the authorized repairers to the customer service available at www.segway.com. For any question, please contact customer service available at www.segway.com.

Efforts have been made to simplify wording in the user manual for users. Where an action appears too complicated for a user, he is advised to contact an authorized or a specialized repairer or customer service.

12 Specifications

	Item	E22E/E22D	E22
Dimensions	Length x Width x Height	43.7 × 16.5 × 44.1 in (111 × 42 × 112 cm)	42.9 × 16.5 × 44.1 in (109 × 42 × 112 cm)
	folded: Length x Width x Height	44.9 × 16.5 × 14.2 in (114 × 42 × 36 cm)	44.5 × 16.5 × 14.2 in (113 × 42 × 36 cm)
Weight	Net Weight	Approx. 29.8 lbs (13.5kg)
Rider	Payload	55–220 lbs (25–100 kg)
	Recommended Age	14–60 years
	Required Height	3’11”–6’6” (120–200 cm)
Parameters	Max. Speed	12.4 mph (20 km/h)
	Typical Range [1]	13.7 miles (22 km)
	Max. Slope	15%
	Traversable Terrain	asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
	Operating Temperature	14–104°F (-10–40°C)
	Storage Temperature	-4–122°F (-20–50°C)
	IP Rating	IPX4
	Duration of Charging	Approx. 3.5 h
Battery	Nominal Voltage	36 V
	Max. Charging Voltage	42 V
	Charging Temperature	32–104°F (0–40°C)
	Nominal Energy	184 Wh
	Nominal Capacity	5100 mAh
	Battery Management System	Over-heating, short circuit, over-current, over-discharge and over-charge protection
	Number of Batteries [2]	1
Motor	Nominal Power	300 W, 0.3 kW
Charger	Output Power	71 W, 0.071 kW
	Input Voltage	100–240 V~
	Output Voltage	42 V
	Output Current	1.7 A
Features	Brake Light	LED rear light
	Riding Modes	Speed limit mode, Standard mode and Sport mode
Tire	Tires	Dual Density Tires. Material: synthetic rubber. Size: 9 inches

TypicalRange: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of speed on average on pavement.
Someof the factors that affect range include: speed, number of starts and stops, ambient temperature, etc.
AllKickScooter models could install the second Some of the parameters would change in this case.

16 17

TypicalRange: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of speed on average on pavement.
Someof the factors that affect range include: speed, number of starts and stops, ambient temperature, etc.
AllKickScooter models could install the second Some of the parameters would change in this case.

[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.

Someof the factors that affect range include: speed, number of starts and stops, ambient temperature, etc.

18 19

13 Certifications

For Model: E22, E25A, E45

This product is certified to ANSI/CAN/UL-2272 by CSA. The battery complies with UN/DOT 38.3.

Federal Communications Commission (FCC) Compliance Statement for USA

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cet équipement est conforme aux limites d’exposition aux radiations de la IC définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.

Industry Canada (IC) Compliance Statement for Canada

This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

CAN ICES-3 (B)/NMB-3(B)

Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user’s authority to operate the equipment.

For Model: E22D, E22E, E25D, E25E, E45D, E45E

This product is certified to ANSI/CAN/UL-2272 by CSA. The battery complies with UN/DOT 38.3.

European Union Compliance Statement Important WEEE information

WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product should not be disposal with other household wastes throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsible to promote the sustainable reuse of materials resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmen-tal safe recycling.

Battery recycling information for the European Union

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and amendment 2013/56/EU concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.

In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances.

Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities, the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection.

Restriction of Hazardous Substances (RoHS) Directive

This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”).

Radio Equipment Directive

The company “Segway Europe BV” hereby declares that this device complies with the essential requirements and other relevant provisions of the RED directive 2014/53/EU, the machine directive 2006/42/EC and the RoHS directive 2011/65/EU.

The declaration of conformity can be viewed at the following address: http://eu-en.segway.com/support-instructions

Segway Europe B.V.

EU Contact Address for regulatory topics only: Hogehilweg 8, 1101CC Amsterdam, The Netherlands.

Hereby, Ninebot (Changzhou) Tech Co., Ltd, declares that the wireless equipment listed in this section are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Bluetooth	Frequency Band(s)	2.4000-2.4835GHz
Bluetooth	Max. RF Power	20mW

Trademarkand Legal Statement

Ninebot is the registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; Segway and the Rider Design are the registered trademarks of Segway Inc.; Android, Google Play are trademarks of Google Inc., App Store is a service mark of Apple Inc., The respective owners reserve the rights of their trademarks referred to in this manual.

The KickScooter is covered by relevant patents. For patent information go to http://www.segway.com.

We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of printing. However, due to constant improvement of product features and changes of design, your KickScooter may differ slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App.

Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the KickScooter product and documentation without prior notice.

15 Contacts

Americas:

Segway Inc.

14 Technology Drive, Bedford, NH 03110, USA Toll Free: 1-888-523-5583

Fax: 1-603-222-6001

Technical Support Email: [email protected] Website: www.segway.com

Europe, Middle East and Africa:

Segway Europe B.V.

Hogehilweg 8, 1101CC Amsterdam, The Netherlands Website: www.segway.com

Have your KickScooter serial number on hand when contacting Segway.

You can find your serial number on the underside of your KickScooter or Basic Information in the Segway-Ninebot App.

Ninebot KickScooter MAX G30P User Manual

Contents Thanks for choosing the Ninebot KickScooter!

1 Riding Safety

2 Packing List

3 Diagram

4 Assembling Your KickScooter

7 Charging

8 Learning to Ride

9 Warnings

11 Maintenance

12 Specifications

13 Certifications

Federal Communications Commission (FCC) Compliance Statement for USA

Industry Canada (IC) Compliance Statement for Canada

European Union Compliance Statement Important WEEE information

Battery recycling information for the European Union

Restriction of Hazardous Substances (RoHS) Directive

Segway Europe B.V.

15 Contacts

Europe, Middle East and Africa:

Leave a comment

Cancel reply